Metal Technologies Inc.



Home > Metal Fabrication Pre-Heat Mold Ovens

Metal Fabrication Pre-Heat Mold Ovens

All of our ovens are completely assembled, tested, and ready for production. Sizes, load space, and number of doors on ovens are made per customer specification. 

The HC-325-E and the HC-325-G Units are made with the same equipment as our larger model ovens. The load space is only half as wide as the 650's and are available in electric or gas. 

HC-325-E SPECS
- 32 1/2" wide x 33" deep x 20" high 
- 18 K.W. 
- Maranite insulation 
- Firebrick bottom 
- Indicating light to show over-heat 
- High Limit Control shuts oven down should over-heat occur 
- Finger Touch Watlow® digital control 
- 900CFM Recirculating blower 
- The door is hinged, counter weight, or pneumatic (your choice)

 

HC-325-G SPECS
- Natural gas burner - L.P. gas burner also available 
- Fibre Frax Insulation Blanket 
- Fire Brick Bottom 
- Automatic shut off when door is opened 
indicating light to show over-heat 
- High limit control shuts oven down should over-heating occur 
- Watlow® digital control 
- 100,000 to 800,000 BTU 
- Low pressure firing, electric ignition, positive shut off 

 

The HC-650-E and the HC-650-G are used in glass container factories from Canada to Australia. All HC-650 ovens have high limit control. 

HC-650-E SPECS
-
Electric or Gas (your choice) 
- 36 K.W. Electric 
- Recirculating blower (optional) 
- 38 to 1000°F Digital 0 to 538°C 
- 65"wide x 33 1/2"deep x 20"tall load space 
- Oven shut down when door is opened 
- Firebrick bottom, maranite insulation 
- High limit control shuts oven down should over-heating occur 
- Indicator light to show over-heating 

 

HC-650-G SPECS
- Load Space of 65"wide x 33 1/2"deep x 20"tall 
- Low pressure intermittent firing, positive shut off 
- 100,000 to 800,000 BTU natural gas burner 
- Indicating digital Control 38 to 1,000°F 
- High limit control 
- Marinite insulation 
- Firebrick bottom 
- Red light indicator should over-heat occur 

The MW-650-E Electric Oven and the MW-650-G Gas Oven are both available with one or two doors, made upon customer specification.

MW-650-G SPECS 
- 100,000 to 800,000 BTU 
- Low pressure firing 
- Positive shut off 
- Intermittent firing 
electric Ignition 
- Honeywell® ignition control 
- 38°F to 1000°F Digital Control 
- 0 to 1,000°F High Limit Control 
- Marinite Insulation 
- Firebrick Bottom 
- Pneumatic Operated Door 
 

 

MTI-1000 CNC Controlled Automatic Oven was designed for delivery trough cleaning. One touch operation does it all! Door opening and closing, load rack - loaded and unloaded from oven, burners off and on switch is all automatic.

MTI-1000 SPECS 
-
102"wide x 48"deep x 48"tall Load Space 
- (2)each 100,000 to 800,000 BTU Natural - Gas Burners 
- Low pressure firing 
- Intermittent lighting 
- Electric ignition 
- Positive shut off 
- Digital Temperature Control 
- High Limit Control 
- Red light indicator light signal should over-heating occur. 
 

 

 

 

Site Map Feedback Terms of Use
Web Design By Perfection Web Designs Copyright© 2005 All rights reserved.